Manual screen washer made of aluminium
with solvents tank, pump, hose, and washing brush, complete with exhaust ventilator, for max. screeen frames approx. 110 x 140 cm. Used, technically o.k., optically medium condition. The unit es ex-proof, the switch box belonging to the unit is not ex-proof and, according to the prescriptions, must be mounted with a distance of 5 m to the unit or separated by a fire-proof wall.

Manual screen washer model ST
made of aluminium, with solvent filter tank, hose, pump and washing brush, as well as build-in exhaust ventilator, for max. screen frames 160 x 280 cm, overall dimensions approx. 300 cm wdth x 60 cm deep x230 cm heigh with stand. Used, technically in working order.

Manual screen washer made of stainless steel
for max. screen frames 110 x 125 cm, o.d. 145 x 88 x 200 cm, compl. with solvents collecting tank, pump, hose, and washing brush, ex-proof unit. Working, medium condition

Manual screen washer made of aluminium
with solvents tank, pump, hose and washing brush, with exhaust ventilation, for max. screen size 140 x 180 cm, unused demonstration model, as good as new, special price.

Manual screen washer made of stainless steel
for max. screen frames 150 x 190 cm, o.d. 220 x 88 x 215 cm (L/D/H), with solvents tank, pump, hose and washing brush, with connection piece for exhaust air, with ventilator. Used, very good condition

Automatic screen washer model SPS-AUTOJET W/E
Vertical unit for cleaning the screen frames from ink, with intermediate dripping/drying station, decoating unit with high-pressure nozzles, suitable for screen frames 140 x 180 cm, complete with distilling unit with fresh water tank. With water and chemicals recycling unit. Year of construction approx. 1990, in operation until 2 years ago, actually disassembled, should be completely overhauled. Price ex place.

 1.800 €

  3.500 €

  3.850 €

Manual hand-cutting device
(sliding knife), suitable for 100 cm wide foil rolls, incl. floor stand and fixation for one roll, used, in very good condition.

Manual cutter
82 cm cutting length, manual lever cutter for putting on existing table, with counter balance. Used, older model, working, medium condition.

foil stand
moveable, suitable for pushing on 6 foil rolls up to 100 cm width, in working condition.

Hand-cutting device for foil rolls
with pneumatic drive via foot switch, 110 cm cutting width, pneumatic knife slide, incl. 2 m table and foil stand, rarely used, condition as new, special price.

Cutting machine POLAR 82 EL
cutting width 82 cm, with 2 spare blades, machine with mechanical dimensional adjustment, glass scale and visual
telescope. Year of construction approx. 1970, technically o.k. and working, will be partly overhauled and then be
technically and optically in medium to good condition (no actual professional association check for Germany)

HEIDELBERGER punching and printing platen press
Size approx. A4. Older model, working condition, without overhauling. Price ex place

Roll cutter model 194 G
for cutting sheets from foil or paper rolls, max. width 126 cm, with blade box running to the right/left, with quantity pre-selection and size pre-selection in mm. Older model, technically o.k. and working, medium condition.

Cutter for foil rolls model FLEXA
Suitable for rolls with width up to 160 cm, easy handling, with switch for manual operation. Demonstration resp. exhibition model, special price

Squeegee grinder model ALBERT
grinding head with changeable grinding belts, squeegee clamping for different profiles, automatically motor pushing, max. squeegee length 150 cm, grinding head with exhaust equipment. Older model, technically o.k. and working, medium condition

Squeegee grinder model STANDARD, grinding length 130 cm
table-top model 380/400 V. Unused demonstration model, special price

Squeegee grinder model STANDARD, grinding length 160 cm
table-top model 380/400 V. Unused demonstration model, special price

Manual squeegee grinder
grinding length 150 cm, table-top model, 308/400 V. Used, medium condition

Screen rack
suitable for 10 screen frames up to the size of 120 x 160 cm, complete with casters. Used, good condition

screen rack
for 15 screen frames up to size 130 x 160 cm, without casters. Older model, working condition

All-steel drying rack
with 50 shelves with bars, size 60 x 90 cm, plastic coated in white, rarely used demonstration model.

All-steel drying rack
with 50 galvanized shelves with wires, size 60 x 90 cm, with rubber casters. Exhibition model, special price.

All-steel drying rack model STABILO
with 50 shelves, galvanized shelves with rods, blue lacqued support with synthetic caster wheels, size 60 x 90 cm. Rarely used, slightly oxidation marks at the galvanizing

All-steel drying rack 75x105
with 45 shelves with rods, size 75 x 105 cm, with support and casters. Used, older model, working, medium condition

Ganzstahl-Trockengestell, 90 x 126 cm
mit 50 Rosten, verzinkte Rosten mit Drahtmaschenbespannung, verzinktes Grundgestell, Format 90 x 126 cm, gebraucht, mittlerer bis guter Zustand.

All-steel drying rack model 90 x 126 cm
50 galvanized shelves with wire mesh, galvanized stand, shelves with plastic spacers, size 90 x 126 cm. Used, working but worse condition

All-steel drying rack model DWO
50 galvanized shelves with rods, size 90 x 126 cm, galvanized stand with synthetic casters.

All-steel drying rack model STABILO
with 50 shelves, shelves galvanized with rods, blue painted bench with plastic casters, size approx. 90 x 130 cm. Only rarely used demonstration models, condition as new, special price. Actually 4 pcs. available.
(Actual price for new rack 1.430,00 €)

All-steel drying rack model HO, 90x130
50 galvanized shelves with wire mesh, size 90 x 130 cm, lacqued support with rubber casters. Used, working, medium condition.

All-steel drying racks 90x130
50 shelves with wire-mesh, size approx. 90 x 130 cm. Used, older models, working, optically bad condition

All-steel drying racks
with 50 shelves, galvanized shelves with wires, complete with casters, size approx. 90 x 130 cm. Unused demonstration models, special price per piece

All-steel drying rack model STABILO, 90x130
with 50 shelves, size 90 x 130 cm, white powder-coated shelves with rods, blue lacqued support with synthetic casters.
Rarely used, very good condition. 2 pcs. available.

All-steel drying racks
with 50 shelves, galvanized shelves with wire mesh, with support and casters, size 100 x 140 cm. Unused demonstration models, special price/pc.

All-steel drying rack model STABILO 100x140
50 galvanized shelves with rods, size 100 x 140 cm, blue lacqued support with synthetic casters, Rarely used, very good condition, nearly as good as new.

All-steel drying rack model DWO, 100x140
50 galvanized shelves with rods, galvanized support with synthetic casters. size 100 x 140 cm. Used, very good condition

All-steel drying racks
with 50 shelves, galvanized shelves with wires, with casters, useable size 100 x 200 cm. Unused demonstration models, special price per piece

Vibrating table 70 x 100
for sheet size 70 x 100 cm, with adjustable vibrating motor (380/400 V), adjustable inclination, steady. Technically o.k., medium to good condition.

Vibrating table
for sheet size approx. 100 x 140 cm, with adjustable vibrating motor (380/400 volts), angular adjustable, with adjustable stop plates, base plate made of approx. 3 cm natural hardwood, movable on casters. Older model, working, medium condition

Vibrating table
for sheet size 125 x 200 cm, with adjustable vibrating motor, adjustable tilt, movable on casters. Older model, working condition.

Pneumatic screen stretching device
equipped with 10 stretching clamps each 25 cm wide, suitable for screen frames approx. 50 - 60 x 70 - 80 cm, complete with connecting hoses, distribution ledge and operation panel, without table. Rarely used demonstration model, special price

Pneumatic screen stretching device
equipped with 22 ARGON stretching clamps each 25 cm wide, suitable for screen frames approx. 130 x 160 cm. Older model, without reception table, working condition.

 Sprint-Cap.pdf

Digital transfer press model HTP-1620, 41x51
handy and sturdy hand lever press, printing area 41 x 51 cm, demonstration model

Digital transfer press model HTP-1515, 38x38
handy and sturdy hand lever press, printing area 38 x 38 cm, demonstration model

Transfer press model STAHLS Sprint Clam
printing area 40 x 50 cm, with analogue display. Rarely used demonstration model, special price

Transfer press model AIRPRESS
with table beneath, digital display for time and temperature, with swivelling head as double press, 2 printing areas each 40 x 50 cm, 230 volts + compressed air 6 bar necessary. Rarely used demonstration model, special price

Corona generator with 1 electrode 60 mm
size 450 x 180 x 400 mm, electric connection 230 V, 50-60 Hz, weight 15 kg. Power consumption 550 VA when 230 VAC 50/60 Hz. Electrode power 450 VA, interface for external control and supervise. 2 m hose to the electrode.

Corona generator 402
size 450 x 180 x 400 mm, electric connection 230 V, 50-60 Hz, weight 18 kg. Power consumption 2 x 550 VA when 230 VAC 50/60 Hz. Electrode power 2 x 450 VA, interface for external control and supervise. 2 m hose to the electrode.
New demonstration device, year of construction 2007.

Corona generator with 1 electrode 60 mm
size 450 x 180 x 400 mm, electric connection 230 V, 50-60 Hz, weight 15 kg. Power consumption 550 VA when 230 VAC 50/60 Hz. Electrode power 450 VA, interface for external control and supervise. 2 m hose to the electrode, used, optically good condition.

Parts spraying cabin with exhaust
useable size approx. 110 x 130 x 100 cm, with ex-proof illumination, overall dimensions approx. 150 x 150 x 205 cm. Older model, working condition.

Spraying cabin for parts with exhaust
useable size approx. 110 cm wide x 90 cm high x 80 cm deep, with exhaust ventilator. Older model, working, medium condition

Manual squeegee washing basin
made of aluminium, with solvent filter tank, explosion-proofed version, with buid-in exhaust ventilator and cover suction, suitable for squeegee lenghts up to approx. 150 cm, used, in working order, medium condition.

Sheet cleaning device TECHNI-CLEAN
working width 70 cm, equipped with washable cleaning rolls, no adhesive rolls necessary. Older model, working

Corner Rounder mod. FOELLMER, type HE
manual table-top model, sturdy device. Used, good condition.
As new device 1.800,00 €

Ventilation stand with fans
movable on casters, with 3 height-adjustable ASTRON heating fans, heating fans with 4 ventilation steps and 2 heating
steps. Unused demonstration model, special price.

Stand with heating fans, movable on casters
with 3 height-adjustable Astron heating fans, fans with 4 ventilation steps and 2 heating steps. Used, technically o.k.,
medium to good condition.

Screen storage stand
for 12 big size screen frames, galvanized sturdy models. 3 pcs. available

Screen storage stand - double model
for screen frames 150 x 200 cm (2 pcs. available)

MIRUS sheet stacker
max. sheet size 130 x 160 cm, working in longitudinal direction, older model, in working order.

MIRUS sheet stacker UN II (heavy model)
suitable for max. sheet size approx. 145 x 185 cm. Used, working, medium to good condition

Pic01.jpg

Pic02.jpg

Hydraulic punching machine, model SANDT
bridge punching machine with swivelling head, with sliding table, punching pressure 8 tons, punching size approx. 35 x 45 cm. Sturdy machine, technically good condition.

Sandt.pdf

 Pic01.jpg

Automatic water recycling unit AWL 300
emulsion splitting unit with filter bags, working as charges unit, reaction powder is fed automatically, with sensor control. Used, older model, technically o.k. and in working condition

Compressor unit type FLACO KAZ1000G
unit with series device and pressure switch, 2 cylinders, 16 bar, suction power 750 ltr/min, 5,5 kw driving motor 900 r.p.m., year of construction 2001. Complete with compressed air tank type RÖMER, 750 ltr, 16 bar - standing, 750 mm dia., height 1900 mm. Complete with attached air drying device model FLACO. Rarely used, very good condition.

Squeegee holder for wall mounting
for 10 squeegees. Used, medium condition